DTF Heat Transfer – Direct to film heat transfers

DTF Heat Transfers

(1) 12″x20″
(5) 12″x20″
(10) 12″x20″

Let us print your custom heat transfers using direct to film technology. Our custom prints are made to order and can be used in a variety of situations such as corporate shirts, graduations, parties, weddings, family reunions, team sports, and so much more. Start your own apparel brand with your own logos and designs.

These heat transfers are full color, ready to press, and are backed with white ink, so you can press them onto any garment light or dark. Our prints have been tested to 50+ wash cycles and will remain vibrant and soft.

A heat press is recommended for DTF transfers. These prints require a decent amount of pressure along with 320+ degrees of heat. Once press, a cool peel will provide the best results.

*you may gang run your files on the sheet if files are provided in the proper format.

*File should be supplied to us in PNG format with a transparent background. 300dpi at full size is recommended. The transparent part will not print and anything that has color will print with white behind it. This is also where the non-activated adhesive will stick to. If you provide a picture in a rectangle or square format, the image will be printed as a rectangle or square. Please contact us for assistance if necessary. Sales [!at] xlprinting.com

**All Custom DTF prints are non-refundable therefore cannot be returned. Should a problem arise with the manufacturing of our product, we will gladly work with you to provide a replacement or solution to the problem.

Heat Press Guidelines:

*Use a teflon sheet to cover film and garment

Cotton, 50/50 Cotton/Poly, and Blends:
Press 310-320 degrees for 15 second / medium pressure

Polyester, Nylon, Neoprene:
Press 280 degrees for 12 seconds medium pressure

Cold Peel (let film cool on the garment until it is cool to the touch)

Re-press the garment after pulling off the film. Use a teflon cover sheet to prevent scorching